|
|
|
Lumenite Light Sleeve - T8
|
T8
|
|
Sold in cases of 10
|
Detailed Description
A totally new and unique emergency lighting solution providing 100% reliable emergency lighting that is fail-safe and free. This simple and ingenious emergency safety lighting system instantly provides low level emergency lighting whenever needed. Install Lumenite Light Sleeves in all building egress and exit routes, use them to cover all fluorescent tubes, used in overhead fixtures, illuminating lighting stairwells, fire escapes, hallways, exits, elevators and car parking areas. Lumenite Light Sleeves should be installed on 10% to 20% of all fixtures throughout your building so during a power failure the buildings occupants are never left in the dark or subjected to dangerous black-out situations. Lumenite Light Sleeves provide a guaranteed failsafe evacuation system that does not rely on your main power source or batteries, they work every time and require no testing or maintenance. If your lights have been on at all, the Lumenite Light Sleeves are charged for a minimum of 8 hours of passive, power free, failsafe illumination. For use with all 4' foot T8 and T12 fluorescent lamps. The Lumenite Light Sleeve is available as a full length totally encapsulating glass containment design providing maximum emergency light output.The sleeve is also available as a custom fit unit, designed to balance unfiltered light with evacuation lighting allowing increased use of the sleeve in high level lighting demand areas. A custom length sleeve can be used to increase light output in areas where a fully sleeved lamp decreases light levels lower than desired. Low initial cost * No ongoing costs * No batteries needed * No mains power source needed * No wiring needed * No alterations to your existing fittings * No tools needed * No switches needed * No internal parts * Automatic and instant activation * Reduced power bills * Increased security * Increased safety * Environmentally friendly * Provides tube breakage protection * Qualifies as a glass containment device * 100% reliable * Non-toxic * Sites kept illuminated under all conditions * Quick and easy to install * Last for up to 20 years
Lumenite® Light Sleeve |
A totally new and unique emergency lighting solution providing 100% reliable emergency lighting that is fail-safe and free. This simple and ingenious emergency safety lighting system instantly provides low level emergency lighting whenever needed.  |
 |
Lumenite Light Sleeve Flyer |
|
|
Lumenite Light Sleeves are a failsafe Lighting source.
Install Lumenite® Light Sleeves in all building egress and exit routes, use them to cover all fluorescent tubes, used in overhead fixtures, illuminating lighting stairwells, fire escapes, hallways, exits, elevators and car parking areas. Lumenite Light Sleeves should be installed on 10% to 20% of all fixtures throughout your building so during a power failure the buildings occupants are never left in the dark or subjected to dangerous black-out situations.
Lumenite Light Sleeves provide a guaranteed failsafe evacuation system that does not rely on your main power source or batteries, they work every time and require no testing or maintenance. If your lights have been on at all, the Lumenite Light Sleeves are charged for a minimum of 8 hours of passive, power free, failsafe illumination.
* Low initial cost * No ongoing costs * No batteries needed * No mains power source needed * No wiring needed * No alterations to your existing fittings * No tools needed * No switches needed * No internal parts * Automatic and instant activation * Reduced power bills * Increased security * Increased safety * Environmentally friendly * Provides tube breakage protection * Qualifies as a glass containment device * 100% reliable * Non-toxic * Sites kept illuminated under all conditions * Quick and easy to install * Last for up to 20 years
For use with all 4' foot T8 and T12 fluorescent lamps. |
|
 |
Designed to fit T-8 and T-12 Lamps |
|
|
 |
Room with Lights On |
|
|
 |
Room with Lights Off- Lumenite Light Sleeve illumination |
|
|
 |
Lumenite Light Sleeves in use. |
|
|
The Lumenite Light Sleeve is available as a full length totally encapsulating glass containment design providing maximum emergency light output.
The sleeve is also available as a custom fit unit, designed to balance unfiltered light with evacuation lighting allowing increased use of the sleeve in high level lighting demand areas. A custom length sleeve can be used to increase light output in areas where a fully sleeved lamp decreases light levels lower than desired. |
 |
Custom Length Lumenite Light Sleeves |
|
|
HYLINE SAFETY COMPANY and LUNA GLOW have been awarded for being recognized as one of Buildings Magazine's Top 100 Product Picks. Our Lumenite Light Sleeve product was picked out as an Editors Choice Top Product from one of the many hundreds of products submitted and was featured in the December 2005 issue of Buildings Magazine. This special edition of Buildings Magazine will reach the hands of 72,000 building owners and facility management professionals. |
 |
The Lumenite Light Sleve is a Buildings Magazine Editors Choice Top 100 Product |
|
|
|
 |
The Lumenite Light Sleeve has wonn the 2005 Commitment to Safety Award |
|
Hyline Safety has won the Compliance Magazine 2005 Commitment to Worker Safety Award in the Best in Security category for its patented Lumenite Light Sleeve product made by Luna Glow. The award will be presented at the National Safety Congress Expo in Orlando, FL on Sept. 21, 2005 -- The Compliance Magazine Commitment to Worker Safety Award recognizes achievements in safety equipment product development. -- A panel of impartial industry experts evaluated each entry based on innovation, impact on worker safety, and ease of use. The 2005 judging panel: Jan Rosenberg, CSP, CSHM, CPCU, ARM, AIM, Chief Administrative OfficerNevada Safety Consultation and Training Section Nancy Moorhouse, Vice President, Director of Safety for Teichert Construction/Teichert Materials, MSP, CSP, ARM, CSHM Tom Slavin, Manager Occupational Safety and Health, International Truck & Engine Corp. |
|
|
|